ZYNQ FPGA Tutorial

This tutorial is about the basic FPGA using Verilog and C (for programming the Zynq's ARM processor). It consists of eight parts, from the basics to the final project. In the final part, we are going to build an AI neural network system that utilizes both FPGA and ARM processors.

• Part 1: Gate-Level Combinational Circuit

• Part 2: RT-Level Combinational Circuit

• Part 3: Regular Sequential Circuit

• Part 4: FSM Sequential Circuit

• Part 5: ZYNQ Architecture

• Part 6: ARM CPU and FPGA Module

• Part 7: FPGA Memory

• Part 8: Hardware Accelerator for Neural Networks

All program code can be found in this repository: fpga101